We are pleased to release the one-cable technology BiSS Line which enables using the established BiSS C Protocol and all of its functions and features over just two wires. BiSS Line has been designed to ensure proper power & data transmission – even in rough environments and on long transmission lines.
Continue reading
Bogen presents a starter set for a quick introduction to magnetic position and angle measurement technology: The Absolute Starter Kit contains a rotary and a linear scale, a sensor head that can be used for both scales and a programming interface for scale calibration via BiSS. Instructions and software are available for free download. The starter kit enables a simple and inexpensive entry into the world of absolute measuring technology in the μm range.
Continue reading
The ultimate BiSS Interpolator is presentated by iC-Haus, Joachim Quasdorf at SPS IPC DRIVES 2018.
The brushless DC miniature and microdrives from FAULHABER use small absolute AESM encoder with BiSS interface for a robust and future-proof standard.
The AESM series absolute encoders from FAULHABER are very compact and fit even on miniaturised, brushless DC drives with a diameter of just 8 mm.
The 2-channel BiSS C interface for direct connection of BiSS C encoders is suitable for exact and fast positioning applications – with distributed clocks ensuring high synchronicity with other processes. Via unidirectional BiSS C communication, the EL5042 sends as a master the clock signal for position detection to the BiSS C slave (encoder), which returns the position data with up to 64-bit resolution. The EL5042 can be optimally adapted to different encoder types by selecting appropriate operation modes, transmission frequencies and frame widths.
The EtherCAT Terminal system is a modular I/O system consisting of electronic terminal blocks. The EtherCAT protocol remains fully intact down to the individual terminal. Beckhoff provides an extensive range of fieldbus components for all common I/O and fieldbus systems. The wide choice of I/O components means that the bus system best suited to the particular application can be chosen.
See more about the Beckhoff EtherCAT I/O system.
Read more about the ultra-fast I/O system EtherCAT Terminals.
View detailed technical data of EL5042.
Electronica Mechatronic Systems (I) Pvt. Ltd. presents the EMA21 Absolute Linear Magnetic Encoder, made in India for first time.
It supports BiSS C protocol along with optional digital incremental RS422 or analog 1Vpp outputs.
It supports maximum length up to 60 meters. EMA21 offers IP67 protection against dust and coolants.
Resolutions of 1µm and 5µm with measurement speed of 4m/s @ 1µm.
Ideal choice for robotics, pick and place applications, precise positioning and many more applications.
More details Electronica Mechatronic Systems (I) Pvt. Ltd.
POSITAL’s kit encoders are available with BiSS for absolute measurements.
The contact free measurement technology has no moving parts and is highly resistant to shock and vibration.
A built-in self-calibration capability can compensate for small sensor-to-shaft alignment errors.
17 bit electrical resolution and multiturn position measurements with a range of more than one million revolutions.
The energy harvesting system is based on the Wiegand effect and eliminates the need for backup batteries or complex gear systems.
POSITAL‘s kit encoders offer a unique combination of accuracy, reliability and cost efficiency.
More about the BiSS KIT encoder from POSITAL.
